Petcock rebuild kits

[fixxervi6]

Anyone know where I can find petcock rebuild kits for a 2001 kawi ninja?

Usual bike part sites bikebandit etc don't have the rebuild kits, just the entire petcock.

[Grinner]

Dude...really...a petcock could not cost that dang much. Esp considering I bought a brand new tank with cap and petcock for 28 shipped on ebay.

[fixxervi6]

Dude...really...a petcock could not cost that dang much. Esp considering I bought a brand new tank with cap and petcock for 28 shipped on ebay.

$75

[Grinner]

Howly cwraps!!!!

[fixxervi6]

Telo found a site that had the parts

[Telomere]

Telo found a site that had the parts

And I am nowhere close to computer nerd status. Go figure!

[Fender943]

I just bought a rebuild kit for my '86 1000 for $35 from Bates Cycle.

[fixxervi6]

I just bought a rebuild kit for my '86 1000 for $35 from Bates Cycle.

I was able to find kits for a lot of other ones and other years, but nothing in this range.

The petcock was cloged good, causing fuel starvation

[DarcShadow]

Is it damaged, or just clogged? Should be able to run some carb cleaner through it and get it cleaned out and be good to go.

[fixxervi6]

Is it damaged, or just clogged? Should be able to run some carb cleaner through it and get it cleaned out and be good to go.

Both, just needed the rubber gasket for the selector and a couple o-rings, I cleaned up the rest of it.

[fixxervi6]

Well, anyone know a good source for float valves?

BikeBandit has them listed at $34 EACH I'm like holy crap, what is that thing made of, gold?

[Firewa11]

Check http://www.ronayers.com" onclick="window.open(this.href);return false;, I've had pretty good luck finding most parts they sell to be on average 25% less than bikebandit... Looks like... part 16041-1007 (VALVE-FLOAT) for $25.90

[WillK675]

You can also call Dave up a at Cyclewerkz and order parts through them.