Does anyone have a drill press?
- Polokid69
- Club Member
- Posts: 3170
- Joined: Wed Jul 04, 2012 11:58 am
- Achievement count: 23
- Location: Fort worth
Does anyone have a drill press?
I need to drill a couple holes in this lower exhaust cover I got. The holes on it are not centered correctly making it too tight on the right side and a gap on the left. I'm afraid of drilling it freehand and scratching the painted surface.
Current Bike:
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
- DarcShadow
- Club Staff/Web Master
- Posts: 15130
- Joined: Thu Aug 24, 2006 9:20 pm
- Riding Style: Advanced Track Rider
- Achievement count: 45
- Location: Azle, TX
- Contact:
Re: Does anyone have a drill press?
If you are just wanting to to expand the hole a round cut file may work easiest. A dremil and a grinding stone would accomplish the tast as well.
I Refuse to Tiptoe Through Life...Only to Arrive Safely at Death.
Attack Life! It's gonna kill you anyway.
http://www.facebook.com/DSDecals
Attack Life! It's gonna kill you anyway.
http://www.facebook.com/DSDecals
- Polokid69
- Club Member
- Posts: 3170
- Joined: Wed Jul 04, 2012 11:58 am
- Achievement count: 23
- Location: Fort worth
Re: Does anyone have a drill press?
The holes just need to be moved over a tad. I just don't want damage the plastic or damage the paintDarcShadow wrote:If you are just wanting to to expand the hole a round cut file may work easiest. A dremil and a grinding stone would accomplish the tast as well.
Current Bike:
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
- Rhino
- Posts: 7793
- Joined: Thu Jan 21, 2010 11:30 am
- Riding Style: Intermediate Track Rider
- Achievement count: 35
- Location: Edge of Arlington
Re: Does anyone have a drill press?
Eh, it's plastic, just push it into place.
I'd use a round file for that job instead of trying to drill it.
Also you loosened ALL the mounting bolts before you got to that point, right?
I'd use a round file for that job instead of trying to drill it.
Also you loosened ALL the mounting bolts before you got to that point, right?
- milesmiles
- Ride Leader
- Posts: 13622
- Joined: Fri Jun 04, 2010 4:40 pm
- Riding Style: Advanced Track Rider
- Achievement count: 27
- Location: Denton
Re: Does anyone have a drill press?
Cover the paint in painters tape before you do any cutting
The world needs Miles
Sometimes you gotta draw the line, but that doesn't mean it can't be squiggly-miles
"it's not a stupid dirt bike, it's a supermoto!"-miles
Sometimes you gotta draw the line, but that doesn't mean it can't be squiggly-miles
"it's not a stupid dirt bike, it's a supermoto!"-miles
- Polokid69
- Club Member
- Posts: 3170
- Joined: Wed Jul 04, 2012 11:58 am
- Achievement count: 23
- Location: Fort worth
Re: Does anyone have a drill press?
What does buying a Honda and modding an accessory have to do with each other?
Current Bike:
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
-
- Club Member
- Posts: 10014
- Joined: Sun Mar 13, 2011 9:35 pm
- Achievement count: 22
- Location: Fort Worth/ Watauga
Re: Does anyone have a drill press?
Honda already comes with all the pretty accessories
Chance favors the prepared mind.
Re: Does anyone have a drill press?
He doesn't want a Honda, gas is expensive.
I would just bend it into place, it's plastic it should flex
I would just bend it into place, it's plastic it should flex
K1600
Re: Does anyone have a drill press?
The painter's tape will help prevent chipping when the cutting is going on.milesmiles wrote:Cover the paint in painters tape before you do any cutting
"Life may begin at 30, but it doesn't get real interesting until about 150."
- Polokid69
- Club Member
- Posts: 3170
- Joined: Wed Jul 04, 2012 11:58 am
- Achievement count: 23
- Location: Fort worth
Re: Does anyone have a drill press?
Seriously, I really want to drill those holes with a drill press or have someone do it for me. This thing was not cheap so I don't want to F-it up!
Current Bike:
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
Re: Does anyone have a drill press?
bang the radiator tabs the other way
"Life may begin at 30, but it doesn't get real interesting until about 150."
- Polokid69
- Club Member
- Posts: 3170
- Joined: Wed Jul 04, 2012 11:58 am
- Achievement count: 23
- Location: Fort worth
Re: Does anyone have a drill press?
I would but I really like it and I think I can adjust it. I asked the company for a partial refund in exchange for keeping it so I'll see how that goesmahart wrote:Send it back as a defect.
Current Bike:
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
-
- Club Member
- Posts: 10014
- Joined: Sun Mar 13, 2011 9:35 pm
- Achievement count: 22
- Location: Fort Worth/ Watauga
Re: Does anyone have a drill press?
Was it advertised for a 2012 Ninja 250?
Chance favors the prepared mind.
- Polokid69
- Club Member
- Posts: 3170
- Joined: Wed Jul 04, 2012 11:58 am
- Achievement count: 23
- Location: Fort worth
Re: Does anyone have a drill press?
Supposed to fit 2008-2012 modelsTelomere wrote:Was it advertised for a 2012 Ninja 250?
Current Bike:
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
-
- Club Member
- Posts: 10014
- Joined: Sun Mar 13, 2011 9:35 pm
- Achievement count: 22
- Location: Fort Worth/ Watauga
Re: Does anyone have a drill press?
Then you need to tell them it doesn't fit your 2012 model and would like a replacement.Polokid69 wrote:Supposed to fit 2008-2012 modelsTelomere wrote:Was it advertised for a 2012 Ninja 250?
Chance favors the prepared mind.
- Polokid69
- Club Member
- Posts: 3170
- Joined: Wed Jul 04, 2012 11:58 am
- Achievement count: 23
- Location: Fort worth
Re: Does anyone have a drill press?
Got them to give me $20 back so I'll adjust it on my own
Current Bike:
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
-
- Club Member
- Posts: 10014
- Joined: Sun Mar 13, 2011 9:35 pm
- Achievement count: 22
- Location: Fort Worth/ Watauga
Re: Does anyone have a drill press?
$20? Tell them that they are falsely advertising their products!
Chance favors the prepared mind.
- 2track
- Posts: 1380
- Joined: Sat Jun 20, 2009 3:00 pm
- Riding Style: Licensed Racer - Novice
- Achievement count: 21
- Location: Benbrook Tx. 76126
- Contact:
Re: Does anyone have a drill press?
I have a drill press man ,your welcome to come over & use it.
- Polokid69
- Club Member
- Posts: 3170
- Joined: Wed Jul 04, 2012 11:58 am
- Achievement count: 23
- Location: Fort worth
Re: Does anyone have a drill press?
Cool, avail this coming weekend?
Current Bike:
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
KTM RC390
Previous Bikes:
2007 Kawasaki ZZR600
2012 Kawasaki Ninja 250R
2002 Kawasaki Ninja ZX6
2000 Kawasaki Ninja EX250
1983 Kawasaki GPZ550
1980 Yamaha RD400
1978 Yamaha DT 125
1978 Yamaha YZ 125
1975 Yamaha DT 100
- 2track
- Posts: 1380
- Joined: Sat Jun 20, 2009 3:00 pm
- Riding Style: Licensed Racer - Novice
- Achievement count: 21
- Location: Benbrook Tx. 76126
- Contact:
Re: Does anyone have a drill press?
Its only gonna take a minute to do. You can come by most any late afternoon.
22 posts
• Page 1 of 1