Maintenance Day

[Stardog]

It's really easy with a very mechanical friend...

Do not let the Aussie accent and calm demeanor fool you. He is by no means a robot.

[111]

I'm in. A billet fwmr key ring would be nice as well.

[shilka99]

I think a keyring should be given out as a reward - as consolation for the days biggest maintenance screwup perhaps? I'll PM some staff to work out a design.

I'm in. A billet fwmr key ring would be nice as well.

PS dont forget to indicate which weekend you'd prefer in the poll.

[LonestarCBR]

...theres nothing we cant achieve with sufficiently large hammers.

Shaun, if things don't work out for you in your current profession, we've got a place for you here in maintenance...you'll fit right in.

[111]

I don't guess the poll shows up on tapatalk, but I voted.

I need to adjust my clutch and not just the clutch lever tension. I mean clutch set screws and whatever else in the actual clutch. Hopefully we can do that without removing the crank case. If not I will need to get another gasket before hand.

[fixxervi6]

I don't guess the poll shows up on tapatalk, but I voted.

I need to adjust my clutch and not just the clutch lever tension. I mean clutch set screws and whatever else in the actual clutch. Hopefully we can do that without removing the crank case. If not I will need to get another gasket before hand.

if your talking about slip adjustment there is a "door" on the clutch cover

[shilka99]

I just cut a sample keyring in acrylic. Thanks to Darkshadow and Dragonfly for the fwmr logo. It only took an hour to cut which isnt bad considering the level of detail. I'll cut another one right now including the outline and the item will be finished. A little polishing will bring it up nice. I'm thinking these might be best if made from acrylic as an aluminum version would do serious damage if used with a motorcycle key.

[DarcShadow]

Looks like it came out really well.

And I just realized this Saturday is the leader in the poll, same day as my planned ride. Hope I'm not stealing anyone way from the maintenance day. I believe there are going to be a couple of ride leaders on the ride, perhaps one of them could lead the group to your place after I split off to go home and take care of the kiddo.

[WillK675]

I haven't voted in the poll because I'm good with all the dates.

[DarcShadow]

I just cut a sample keyring in acrylic. Thanks to Darkshadow and Dragonfly for the fwmr logo. It only took an hour to cut which isnt bad considering the level of detail. I'll cut another one right now including the outline and the item will be finished. A little polishing will bring it up nice. I'm thinking these might be best if made from acrylic as an aluminum version would do serious damage if used with a motorcycle key.

Just curious, can your machine do this?
[youtubell][/youtubell]

[shilka99]

LoL yes it could. In fact, here's one I did years ago...
http://www.cnczone.com/forums/moldmakin ... maker.html

[shilka99]

FYI, Some people have said they will be coming over after 2pm. If anyone has a lot of work they want to do and are worried it will take a long time feel free to come earlier.

Address is:

2711 Marquis Cir. E
Arlington, 76016

Text or call me on 626-833-9810 for any extra info.

[fixxervi6]

How late does this run till?

[shilka99]

until all the work is done? I have no hard time limit.

[DemonDuck]

I hope more people showed after we left Shaun. Either way it was good to see ya.

[Telomere]

We took the 50's tire down there and got it changed. Thanks Shaun!!!