Most recent purchase thread!

[Striple]

I love amazon prime so much.

I just wish that they would also carry groceries.

They do

Not mine, they don't.

[Stardog]

Agreed. That is not food.

[fixxervi6]

They don't have perishable goods - yet - but it's coming.

Oats are food.

[nitzer]

Have to let me know how the fairing repair goes. I have my old ones that I want to repair for track use. The lower mounting tab on one of mine is sheered off, but I do have the piece. Guessing I'll have to re-enforce it with fiberglass to get it to hold.

[milesmiles]

Have to let me know how the fairing repair goes. I have my old ones that I want to repair for track use. The lower mounting tab on one of mine is sheered off, but I do have the piece. Guessing I'll have to re-enforce it with fiberglass to get it to hold.

have you tried plastic weld? I used it to repair the fairings on the MZ & then sanded & painted it. Never knew it was broken.

[Stardog]

Oats are food.

Sick ass.

[Striple]

Suspension service on the triple. That, and freshly mounted tires.

Also, fresh set of number plates from DS.

[WillK675]

Shouldn't that number plate be yellow. Haha

[Striple]

Shouldn't that number plate be yellow. Haha

You can still see some of the remnant yellow paint underneath. That stuff was tough to get off--both figuratively and literally.

[fixxervi6]

Wisdom teeth surgery

[shilka99]

Wisdom teeth surgery

my condolences. thats painful.

[fixxervi6]

Wisdom teeth surgery

my condolences. thats painful.

Mine has been done for years, this would be Monsters.

[nitzer]

Have to let me know how the fairing repair goes. I have my old ones that I want to repair for track use. The lower mounting tab on one of mine is sheered off, but I do have the piece. Guessing I'll have to re-enforce it with fiberglass to get it to hold.

have you tried plastic weld? I used it to repair the fairings on the MZ & then sanded & painted it. Never knew it was broken.

What brand of plastic weld there seems to be many called plastic weld...? The one by JB Weld?

[milesmiles]

Yea that's the one i used. Comes in two tubes, both clay forum. Mix the two together & apply. I put a big glob on mine & just sanded it down a few days later. On the inside i left a few ridges to give it some extra support.

[Striple]

Fiberglass it from the inside, then use body filler, plastic weld, or whatever else can be molded and hardens up to do the outside. Sand, prime, paint, sand some more. Done.

If all you're doing is making a tap, then attaching it with superglue and reinforcing it with fiberglass will work. Just be prepared to sand it down afterwards to make it fit smoothly.

[LonestarCBR]

Miles, if this is on the dirt bike, just use mud. Then you'll always have a ready supply when you're riding...just pour some water on the "track". Presto...instand "bondo".

[Rhino]

Rangefinder. I can now tell to the 0.1 yard how far away things are.

[fixxervi6]

Rangefinder. I can now tell to the 0.1 yard how far away things are.

When the shit hits the fan and the zombies come, you wanna be my spotter?

[Rhino]

Rangefinder. I can now tell to the 0.1 yard how far away things are.

When the shit hits the fan and the zombies come, you wanna be my spotter?

Sure.

"Oh shit, a zombie! Shoot it!"

[sckego]

Rangefinder. I can now tell to the 0.1 yard how far away things are.

Test time:

Retirement

[Rhino]

Next week?

[Firewa11]

Starbucks

[milesmiles]

Triumph daytona shim kit

[Stardog]

Triumph daytona shim kit

There is no emoticon to express my shock.

[fixxervi6]

motul 5w50