MSR 1.3 3/8/2015

Post by **DarcShadow** » Wed Feb 11, 2015 11:41 am

Anyone else going to join me on the 1.3? It really is a fun little track, great for smaller bikes.

Post by **milesmiles** » Wed Feb 11, 2015 11:59 am

the ttr won't be ready in time.

Post by **fixxervi6** » Wed Feb 11, 2015 12:00 pm

I need to dust off the 250 and get it running, no way I'm running the ape on there

LonestarCBR · Post by **LonestarCBR** » Wed Feb 11, 2015 12:41 pm

DarcShadow wrote:Anyone else going to join me on the 1.3? It really is a fun little track, great for smaller bikes.

Yes, L2, with Shaun giving personal instruction all day long. I should be a better rider at the end of the day, but at the very least I hope to develop a really cool accent.

Post by **DemonDuck** » Thu Feb 12, 2015 1:12 pm

I am going to try. Gotta see if I can have the bike ready.

Post by **DemonDuck** » Sun Feb 15, 2015 4:37 pm

I am thinking I might go ahead an register and ride the bike with the current suspension setup. Might not be perfect but should be a bunch better than stock either way.

Post by **DarcShadow** » Mon Feb 16, 2015 10:59 am

Cool, if it's too crazy you can always have it adjusted to some degree at the track.

LonestarCBR · Post by **LonestarCBR** » Mon Feb 16, 2015 1:04 pm

I plan on hopefully having a place staked out on Saturday night if possible, or very early Sunday. You'll easily recognize me as the cool kid with the new DS-provided FWMR decals on the trailer. It should be where the crowd is gathered "oohing and aahing".

DD, just for the record, if you can't get it set to suit you, don't forget I'm available to test it.

Post by **DemonDuck** » Mon Feb 16, 2015 5:07 pm

Registered for Lvl 2. For anyone looking to go Lvl 1 is sold out and Lvl 2 is limited. THey are also doing a special thing instead of lvl 3 and it is limited also. Sooooo if you plan to do it sign up quick.... LOOKING AT YOU FIXXER!

Post by **fixxervi6** » Tue Feb 17, 2015 8:17 am

DemonDuck wrote:Registered for Lvl 2. For anyone looking to go Lvl 1 is sold out and Lvl 2 is limited. THey are also doing a special thing instead of lvl 3 and it is limited also. Sooooo if you plan to do it sign up quick.... LOOKING AT YOU FIXXER!

3/8 is too soon

LonestarCBR · Post by **LonestarCBR** » Tue Feb 17, 2015 11:42 am

That's okay, I think spots are available on 3/9, that should give you time.

Post by **fixxervi6** » Tue Feb 17, 2015 11:43 am

I have a follow up tomorrow to see how much gap is still left in my neck, until it gets solid it's just too much risk. Life as a quad doesn't sound appealing to me.

LonestarCBR · Post by **LonestarCBR** » Tue Feb 17, 2015 11:44 am

10-4 good buddy, I hear that.

Striple · Post by **Striple** » Tue Feb 17, 2015 11:50 am

DemonDuck wrote:I am thinking I might go ahead an register and ride the bike with the current suspension setup. Might not be perfect but should be a bunch better than stock either way.

Treat that as a shake down of the bike: get to know her, make sure everything functions as it should, and focus on what you need to do to make that bike comfortable for you. Roger should be there, so let him adjust the suspension as much as that is possible. Plan on yanking the suspension right after, and sending it off to get it properly sprung and serviced. What kind of tires are on it? Do you need warmers? If they are race tires and you plan on running them without warmers, be mindful that the 1.3 is one of the slickest tracks in Texas when it is cold.

Pooty · Post by **Pooty** » Tue Feb 17, 2015 6:38 pm

fixxervi6 wrote:I have a follow up tomorrow to see how much gap is still left in my neck, until it gets solid it's just too much risk. Life as a quad doesn't sound appealing to me.

Dont risk it
Plenty of other track days

BeautifulDisaster · Post by **BeautifulDisaster** » Tue Feb 17, 2015 8:27 pm

LonestarCBR · Post by **LonestarCBR** » Wed Mar 04, 2015 9:22 am

Ready!

Except I couldn't get a frame bolt busted loose to install the T-Rex sliders.

Needed a cheater bar, or 1/2" drive. Hope to get that done before the track, but who knows. HOPEFULLY they aren't needed if I don't.

Anyone notice I actually WASHED the poor thing?

Rhino · Post by **Rhino** » Wed Mar 04, 2015 9:36 am

Lonestar I've got a 1/2" cheater bar. What size socket do you need?

LonestarCBR · Post by **LonestarCBR** » Wed Mar 04, 2015 9:39 am

12MM, but I can get what I need at work, thanks. I ran out of time, I saved those for last, then had open house with the granddaughters or I'd have come out here an got what I needed. Thanks.

Post by **DarcShadow** » Wed Mar 04, 2015 1:49 pm

man, Sunday is looking pretty chilly at this point.

Post by **fixxervi6** » Wed Mar 04, 2015 2:35 pm

It's gonna be slick guys, make sure you take it easy out there

Striple · Post by **Striple** » Wed Mar 04, 2015 2:43 pm

When green, the 1.3 is probably the slickest track in Texas (even worse than the 1.7), so focus on learning the line in the morning. If the cloud cover breaks, then the track will definitely come in at some point.

BeautifulDisaster · Post by **BeautifulDisaster** » Wed Mar 04, 2015 3:16 pm

Looks like a British bikini top. Nice! Have fun, be safe!

Post by **Telomere** » Wed Mar 04, 2015 4:46 pm

BeautifulDisaster wrote:Looks like a British bikini top. Nice! Have fun, be safe!

I told Fixxer it looked like boobs (he said "in a bikini?"). I agree...they look like boobs in a bikini! We hang out too much.

BeautifulDisaster · Post by **BeautifulDisaster** » Wed Mar 04, 2015 6:42 pm

Not enough!!!

Great minds my dear!!!!!!! ^_^ <3

Fort Worth Motorcycle Riders

MSR 1.3 3/8/2015

MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015

Re: MSR 1.3 3/8/2015