12 volt power adapter

[Polokid69]

I got a 12 volt power adapter from cycle gear but unsure best method of mounting to the bike. I don't have room on the clipons . Any suggestions ?

[Dragonfly]

Try the fairing stay your gauges are mounted to.

[Polokid69]

Is that the one on the left side of the bike? If that's it. The only problem I saw was that you would have to remove the left side fairing

[sckego]

On my VFR I mounted it to the inner fairing panel... http://www.vfrdiscussion.com/forum/inde ... /?p=470210" onclick="window.open(this.href);return false;

Just need to find a spot with enough clearance behind it to accept the plug, and go to work with the dremel.

[DarcShadow]

If it didn't come with one, you should also get an inline fuse to add to protect the rest of the bike.

[milesmiles]

I zip tied mine to the ignition. Looks good and is out of the way. One day I might drill a hole in the fairing infill panels to put it, but nothing's wrong with where I have it

[Firewa11]

I think I'm going to wire in a power block on mine soon, mainly just so I can put in a couple USB connections for charging. It sucked not being able to charge comms at gas stops, charge my phone, etc, on a long haul trip. Which I plan on doing again in the near future.

[milesmiles]

Just get a 12v to USB adaptor

[Polokid69]

Just get a 12v to USB adaptor

Thats what I got for the one I'm installing.