Want an oven

Post by **DarcShadow** » Mon Sep 22, 2014 11:05 am

So as you may of saw in the recent purchase thread, I am now the owner of a powder coat gun. However, I do not have an oven so I'm on the hunt for one. I'll probably just get an used toaster oven to start off with but if anyone knows of a great deal, or preferably free, old oven let me know.

Once I get something setup, and any of you want something powder coated I'd be happy to let you come use the equipment..

Post by **milesmiles** » Mon Sep 22, 2014 11:06 am

Sweet. You need a big enough oven to coat this dirtbike frame I have

Post by **DarcShadow** » Mon Sep 22, 2014 12:43 pm

You buy/find the oven and we'll make it happen.

Firewa11 · Post by **Firewa11** » Mon Sep 22, 2014 1:43 pm

Ya cheap bastard

http://dallas.craigslist.org/ftw/app/4680303371.html" onclick="window.open(this.href);return false;

Post by **milesmiles** » Mon Sep 22, 2014 1:51 pm

So what colors can you do.

LonestarCBR · Post by **LonestarCBR** » Mon Sep 22, 2014 2:05 pm

Yes, he can do pink.

Post by **DarcShadow** » Mon Sep 22, 2014 2:20 pm

Firewa11 wrote:Ya cheap bastard

http://dallas.craigslist.org/ftw/app/4680303371.html" onclick="window.open(this.href);return false;

Yes, so? And $75 is WAY to much, I found one for $30 but I'm hoping to find one for free. Saw one that was listed on Craigslist under the free section about a month ago. Currently I don't really have a place for a full size oven yet. Will need to wire up a 220 line some place, probably in the shed out back but that means I'll have to move things around as it's pretty full right now.

milesmiles wrote:So what colors can you do.

Red, Blue, and black came with the gun. You can get pretty much any color you want, http://www.eastwood.com/paints/hotcoat- ... wders.html" onclick="window.open(this.href);return false;

Just found a DIY for doing rims. Guy took some sheet metal, and basically made a cylinder oven to hold the rim and stuck a heat gun through a hole. Had to run it for over an hour to get the needed temp but it did work.

BeautifulDisaster · Post by **BeautifulDisaster** » Mon Sep 22, 2014 2:27 pm

LonestarCBR wrote:Yes, he can do pink.

There are people in the neighborhood moving and getting rid of stuff, I'll keep my eyes out for a large toaster oven. I could always get a new one and give you mine, a good excuse to get a new one LOL

Post by **DarcShadow** » Mon Sep 22, 2014 2:43 pm

Any free toaster oven would be a good start. I might even look into building a custom oven with a toaster donating the necessary parts.

BeautifulDisaster · Post by **BeautifulDisaster** » Mon Sep 22, 2014 2:46 pm

Okay I'll let you know!

Post by **milesmiles** » Mon Sep 22, 2014 2:52 pm

Does it do gloss?

Post by **DarcShadow** » Mon Sep 22, 2014 3:23 pm

It does what ever color you put in it.

Post by **milesmiles** » Mon Sep 22, 2014 3:55 pm

So gloss then. Gloss red. Candy coated, that's what I want. Pearly, something that pops.

Post by **DarcShadow** » Mon Sep 22, 2014 4:09 pm

They even have glow in the dark colors.

Doing some reading up on things and sounds like doing 2 coats is not the easiest thing to do and may require a better gun than what I have. Apparently translucent as a 2nd layer are really difficult to work with.

Post by **milesmiles** » Mon Sep 22, 2014 4:58 pm

Hmmmm. So how are we going to get this frame dripping red paint.

Post by **dufremle** » Mon Sep 22, 2014 5:11 pm

milesmiles wrote:Hmmmm. So how are we going to get this frame dripping red paint.

I see a rattle can in your future.

Post by **milesmiles** » Mon Sep 22, 2014 5:28 pm

I'm a pro with flat black in a rattle can, but that's it. Plus I'm not really going the cheap route on this project

Fort Worth Motorcycle Riders

Want an oven

Want an oven

Re: Want an oven

Re: Want an oven

Re: Want an oven

Re: Want an oven

Re: Want an oven

Re: Want an oven

Re: Want an oven

Re: Want an oven

Re: Want an oven

Re: Want an oven

Re: Want an oven

Re: Want an oven

Re: Want an oven

Re: Want an oven

Re: Want an oven

Re: Want an oven